• Introduction to Engineering Graphics
  01:23
• Various Drafting Instruments and its Uses
  03:29
• BIS Conventions and Specifications
  01:55
• Dimensioning Methodology
  02:47
• Various Types of Lines
  01:52
• Introduction Scales, its Sizes and Types
  02:49
• Construction of Plain Scale
  03:01
• Construction of Diagonal Scale
  02:59
• Geometrical Constructions
  02:58
• Introduction to Conic Sections
  01:06
• Construction of Ellipse : General Method
  03:36
• Construction of Ellipse : Arc of Circle Method
  03:19
• Construction of Ellipse : Concentric Circle Method
  02:55
• Construction of Ellipse : Oblong Method
  03:27
• Construction of Parabola : General Method
  02:36
• Construction of Parabola : Oblong Method
  01:55
• Construction of Hyperbola : General Method
  03:42
• Construction of Hyperbola : Oblong Method
  02:44
• Introduction to Cycloidal Curves
  03:08
• Involutes
  02:29
• Projection and its type
  02:20
• Conventions for Projection
  01:24
• Difference Between1st & 3rd Angle Projection
  01:51
• Projection of points in Different Quadrants
  01:42
• Projection of Lines: || to 1 or both planes
  01:47
• Projection of Lines: Inclined to 1 and || to other plane
  02:24
• Projection of line: Inclined to both the planes when inclination with both the planes given
  02:16
• Projection of line: Inclined to both the planes when Length of Front View or Top view is given
  02:49
• Traces of lines
  01:33
• Methods for determining traces of a line
  02:55
• Projection of Point on an Aux. Vertical Plane
  03:27
• To determine true length and inclination of Line
  03:14
• Introduction to Projection Of Planes and its type
  01:50
• Projection of Planes parallel to one and perpendicular to other principal plane
  02:13
• Projection of Planes inclined to one and perpendicular to other principal plane
  02:36
• Projection of Oblique Planes
  03:01
• Introduction to Projection Of Solids and its types
  02:15
• Projection of Solids: When axis perpendicular to H.P.
  02:47
• Projection of Solids: When axis parallel to both H.P. and V.P.
  02:27
• Projection of Solids: When axes Inclined to One Plane and Parallel to other Plane
  02:17
• Projection of Solids: When axes Inclined to both the Planes
  02:56
• Introduction to Sections Of Solids
  01:53
• Section of Prisms: Section plane parallel to V.P.
  02:41
• Section of Prisms: Section plane parallel to H.P.
  03:02
• Section of Prisms: Section plane perpendicular to H.P. and inclined to V.P.
  03:33
• Section of Prisms: Section Plane perpendicular to V.P. and inclined to H.P.
  03:49
• Section of Pyramids: Section plane parallel to V.P.
  02:28
• Section of Pyramids: Section plane parallel to H.P.
  03:14
• Section of Pyramids: Section plane perpendicular to H.P. and inclined to V.P.
  03:17
• Section of Pyramids: Section Plane perpendicular to V.P. and inclined to H.P.
  03:28
• Section of Cylinders: Section plane parallel to V.P.
  02:35
• Section of Cylinders: Section plane parallel to H.P.
  02:50
• Section of Cylinders: Section plane perpendicular to H.P. and inclined to V.P.
  02:55
• Section of Cylinders: Section Plane perpendicular to V.P. and inclined to H.P.
  03:16
• Section of Cones: Section plane parallel to V.P.
  02:46
• Section of Cones: Section plane parallel to H.P.
  03:02
• Section of Cones: Section plane perpendicular to H.P. and inclined to V.P.
  03:10
• Section of Cones: Section Plane perpendicular to V.P. and inclined to H.P.
  02:48
• Introduction to Surface Development and its Methods
  01:15
• Development of lateral Surfaces : Cube
  01:31
• Development of lateral Surfaces : Prisms
  02:26
• Development of lateral Surfaces : Cylinders
  01:41
• Development of lateral Surfaces : Pyramids
  01:58
• Development of lateral Surfaces : Cone
  01:58
• Theory of Intersections and line of intersection
  01:03
• Intersections of two Prism
  03:34
• Intersection of two Cylinders
  02:37
• Intersection of Cone and Cylinder
  02:20
• Intersection of Cone and Cone
  02:23
• Introduction
  00:59
• Isometric axes, lines and planes
  01:12
• Isometric Scale
  01:38
• Isometric drawing of planes by Method of Points
  02:04
• Isometric drawing of planes by Four-centre method
  02:48
• Isometric drawing of Pyramid by Offset method
  02:31
• Isometric drawing of Cylinder
  03:24
• Oblique projection and its types
  02:06
• Method of Drawing
  01:42
• Typical problems
  01:40
• Method of drawing by Visual Ray method
  02:25
• Method of drawing by Vanishing Point method
  02:31
• Method of drawing by Visual Ray method
  00:50
• Method of drawing by Vanishing Point method
  00:50
• Line of Heights
  00:50
• Size and Layout of Drawing Sheet
  01:19
• Conventions for Lettering and Symbols
  01:51
• Construction of Parabola : Tangent Method
  02:50
• Projection Planes and Quadrants
  02:46
• Orthographic Views
  02:57
• Introduction to Projection of Lines
  01:52
• Projection of Lines: Contained by 1 or both planes
  01:57
• Projection of Lines: _|_ to 1 of the planes
  01:51
• Introduction to Aux. Planes and its types
  02:27
• Projection of Point on an Aux. Inclined Plane
  03:04
• Projection of Point on an Aux. Plane _|_ to both principal planes
  03:11
• Projection of lines on an Auxillary Plane.
  02:51
• To determine true shape of a Plane
  02:16
• Traces of Planes
  02:12
• Projection of Solids: When axis perpendicular to V.P.
  02:33
• Section of Cube: Section plane parallel to V.P.
  02:16
• Section of Cube: Section plane parallel to H.P.
  02:34
• Section of Cube: Section plane perpendicular to H.P. and inclined to V.P.
  02:20
• Section of Cube: Section Plane perpendicular to V.P. and inclined to H.P.
  02:30
• Different methods used to determine line of intersection
  01:21
• Intersection of Sphere and Sphere
  02:19
• Isometric drawing of Cone
  03:29
• Typical problems
  01:38
• Perspective projection Principle
  01:19
• Line of Heights
  01:27

Our comprehensive MCQs test your understanding of each subject.

Welcome to a new world of learning! A world where you learn what you see.

• 109 Core Study Topics
• Short Duration - 4.37 hours of study
• Visualised Concepts and Diagrams
• Unique study methodology for Numericals and Derivations
• Comprehensive Learning Plan
• Access to course assessments, with Mock Papers and MCQ tests

Upon sign-up you will get complete access to the full study materials.